LIFT-N-WEIGH Model LNW-6 Plus

Our Standard Model LNW-6 PLUS! Dynamic Weighing

Adding the PLUS! Hydraulic manifold to our Standard model allows for Dynamic Weighing which improves weighing accuracy and eliminates differences between operators.

Same Features as our Standard Model LNW-6 but with greater accuracy!

MOUNTED DIRECTLY ON YOUR FORKLIFT THE LIFT-N-WEIGH IS ALWAYS THERE WHEN NEEDED!

  • USE FOR CHECKING FREIGHT IN AND OUT
  • LOADING TRUCKS OR BOXCARS
  • INVENTORY PALLETIZED PRODUCTS
  • MONITORING BULK MATERIAL USAGE
  • A SAFE LOAD INDICATOR
  • HEAVY DUTY CAST ALUMINUM CASE
  • 5 YEAR WARRANTY ON MAIN BOARD ELECTRONICS
  • OPEN RETURN POLICY IF NOT SATISFIED

Pacific Scale Co., Lift-N-Weigh Mfg. Dept Features

50 years Hydraulic Scale experience One (1) year warranty on our products. Five (5) year warranty on our Main board electronics.

Legal for trade forklift scales are available upon request

Category:

Description

The LIFT-N-WEIGH series of forklift scales and loader scales operate on the principal that there is a direct correlation between the pressure in the cylinder and weight on the forks. A pressure transducer in the instrument changes the hydraulic pressure in the primary lift cylinder to an electronic signal which is displayed as weight on the forks.

Installation of your lift truck scale consists of mounting the weigh meter, pre-calibrated to customer’s specs, at a location that is convenient and easy for the operator to read. Installation consists of installing a 1/4″ NPT female fitting (not included with the scale) in the hydraulic line between the control valve and the primary lift cylinder and connecting the power cord to the battery. The 6′ hose furnished with the scale has, at each end,
male 1/4″ pipe thread fitting. One end screws into the fitting customer furnished and other end into the swivel elbow on back of LNW.

Additional information

Capacity

Adjustable to match the vehicle up to 500,000 lbs. higher capacities using decimal tons.

Graduations

1,2,5,20,20,50 lbs. and decimal tons

Power

12V DC to 50V DC External

Filter/Regulators

Provided for protection

Display

8 Digit LCD (0 .70"), Green backlight for high visibility

Controls

Remote Accu, ON/OFF switch, Six Front Panel buttons, Front Panel Calibration

Housing

Heavy Duty Cast Aluminum

Dimensions (Case)

5.75" W x 3.75" H x 3.5" D

Dimensions (Overall)

6.75" W x 6" H x 4.75" D

Options

RS232 output for printer or computer

Internal Timers

Allow for more consistent weight readings